Bosch Wall Scanner, Thermal Camera and Inspection Camera Price

Eleven Bosch tools that find cables, heat, blockages and live wires — what each does and costs.

Updated 28 October 2026 · 6 min

The short answer. Bosch's inspection tools run from ₹2,085 (GVD 1000-17 voltage tester) and ₹6,639 (GMS 120-27 wall scanner) to ₹92,942 (GTC 600 C thermal camera), including 18% GST — prices checked 28 Oct 2026. A temperature gun is ₹4,418, the D-tect 120 radar scanner ₹19,218, and the cheapest thermal camera, the GTC 450-13, ₹74,340.

These are the tools that find what you cannot see: a cable or a rebar in a wall, a hot spot on a surface, a blockage inside a pipe, a live wire. Here are the eleven Bosch models we sell, with the figures from Bosch's data and the price you pay.

Bosch detectors, thermal and inspection tools
ModelWhat it doesKey figurePrice incl. GST
GVD 1000-17Voltage testerAC up to 1,000 V, CAT IV, IP67₹2,085
GIS 500Temperature gun-30 to +500 °C, optics 12:1₹4,418
GMS 120-27Wall scannerMetal 120 mm, live cable 50 mm₹6,639
GMP 2-15Moisture meter+ temperature and humidity₹7,434
D-tect 120Radar wall scannerMetal 120 mm, live cable 60 mm₹19,218
GIC 4-23 C (bare tool)Inspection camera4.3" screen, 8.3 mm head, 1.5 m₹20,815
GIC 5-27 C (bare tool)Inspection camera5" screen, 8.3 mm head, 1.5 m₹28,638
D-TECT 200 CRadar wall scannerDry concrete 200 mm, ± 5 mm₹63,662
GTC 450-13Thermal camera256 × 192 px, -20 to +450 °C₹74,340
GTC 400 CThermal camera160 × 120 px, -10 to +400 °C₹78,202
GTC 600 C (bare tool)Thermal camera256 × 192 px, -20 to +600 °C₹92,942

Prices checked 28 Oct 2026, incl. 18% GST. Specs from Bosch's data on our product pages. Bare tool = no battery or charger.

Live prices — tap a model for its page
Voltage Tester GVD 1000-1706010770K1₹2,085
GIS 500 - Temperature Gun0601083480₹4,418
GMS 120-2706010817K0₹6,639
GMP 2-1506010781K0₹7,434
D-tect 12006010813K0₹19,218
Endoscope GIC 4-23 C ( Bare Tool06012415K0₹20,815
Endoscope GIC 5-27 C ( Bare Tool06012414K0₹28,638
D-TECT 200 C06010816K0₹63,662
GTC 450-13 -Thermal camera06010839K0₹74,340
GTC 400 C - Thermal Camera0601083150₹78,202
GTC 600 C ( Bare Tool ) - Thermal06010835K1₹92,942

Prices include GST and are read from the shop as this page loads.

By job

Before drilling a wall — wall scanners

The GMS 120-27 (₹6,639) finds iron and copper and live cables (to 50 mm) and wooden battens, and has a marking hole to mark the spot through. The D-tect 120 (₹19,218) uses Bosch radar, so it also finds water-filled plastic pipes and non-live cables, reads live cables to 60 mm, and works on drywall and concrete. The D-TECT 200 C (₹63,662) reads 200 mm into dry concrete, finds empty plastic pipes too, to ± 5 mm, and saves scans to micro-SD or USB-C. Then drill — see the drill for a concrete wall.

Temperature — gun or camera

The GIS 500 (₹4,418) reads one spot, -30 to +500 °C, accurate to ± 1.8 °C in the 0–100 °C range. A thermal camera shows the whole surface as a picture. Look at the figures: the GTC 450-13 (₹74,340) costs less than the GTC 400 C (₹78,202) and has the bigger sensor — 256 × 192 against 160 × 120 pixels — and the wider range. What the 400 C has that the 450-13 does not list is Wi-Fi. The GTC 600 C (₹92,942, bare tool) reads to +600 °C, has Wi-Fi and USB-C, and records a voice note with each image.

Inside pipes and ducts — inspection cameras

The GIC 4-23 C (₹20,815) and GIC 5-27 C (₹28,638) put an 8.3 mm camera on a 1.5 m cable, waterproof to IP67, and record pictures and video. Bosch makes them for HVAC, plumbers, electricians and car mechanics. The 5-27 C has the bigger, sharper screen (5 inch, 1280 × 720) and a micro-SD slot. Both are bare tools: they run on a Bosch 12V battery, sold separately — see the battery guide.

Electrical and damp

  • GVD 1000-17 — ₹2,085. Non-contact voltage tester, 24 V to 1,000 V AC, CAT IV 1000 V, IP67, torch, beep and vibration, cable-break detection.
  • GMP 2-15 — ₹7,434. Moisture meter for 37 types of wood and 10 building materials, with room temperature and humidity on the same screen.

Questions buyers ask

What is the price of the Bosch D-tect 120?

₹19,218 including 18% GST (checked 28 Oct 2026), ₹16,287 before GST.

Deewar mein wire dhoondhne ki machine kitne ki hai?

Bosch GMS 120-27 ₹6,639 ki hai — lohe, copper aur chalu taar (50 mm tak) batati hai. Plastic pipe bhi dhoondhna hai to radar wali D-tect 120, ₹19,218.

GMS 120-27 or D-tect 120?

If you only need to avoid cables and rebar before drilling, the GMS 120-27. If you also need to find plastic water pipes, the D-tect 120 — the GMS does not list them among what it detects.

Can the GIS 500 temperature gun check a person's fever?

No. Bosch states it must not be used for human medical purposes. It measures surface temperatures of objects.

Which is the cheapest Bosch thermal camera?

The GTC 450-13, ₹74,340 including GST, ₹63,000 before GST.

What does “bare tool” mean?

The tool without battery or charger. The GIC cameras and GTC 600 C take a Bosch 12V battery. Ask us for the battery price with the tool.

Are these prices with GST?

Yes, with a GST invoice a business can claim input credit on. See what a proper tool invoice must show.

What does delivery cost?

Delivery is charged at actual cost, on top of the price, and confirmed on the call before you pay.

Ask for a price or a recommendation

Tell us what you need to find or measure, and we will tell you which tool does it. Call 9599157340 or send us a WhatsApp. Aryan Enterprises is an authorized Bosch dealer in Badarpur, Delhi. Every machine type we list is on the Bosch price list by machine.

Ask the price on WhatsApp

Also worth reading