Tools for Tile and Flooring Work: Which Machine Cuts, Mixes and Levels
The Bosch machines a tile and flooring contractor buys, step by step, and what the set costs.
Updated 28 October 2026 · 6 min
A flooring job runs in the same order every time: take the old floor up, mix, mark the line, cut, fix. These are the Bosch machines we sell for each step, with Bosch's figures and the price you pay.
| Step | Machine | Key figures | Price incl. GST |
|---|---|---|---|
| Take up old tile | GBH 220 rotary hammer | 720 W, 2 J, 2.3 kg, SDS plus | ₹5,055 |
| Take up old floor | GSH 5HX breaker | 1,100 W, 7.8 J, 5.7 kg, 17 mm hex | ₹16,621 |
| Mix | GRW 140 mixer | 1,400 W, 480 / 750 rpm, paddle to 140 mm | ₹7,378 |
| Mark the line | GLL3X line laser | 15 m, ± 0.5 mm/m | ₹6,298 |
| Mark the line | GCL 15-12 XG | Green lines + plumb points, ± 0.4 mm/m | ₹6,815 |
| Mark the line | GLL 50 G | Green, 2 lines, ± 0.6 mm/m, IP55 | ₹7,330 |
| Cut | GDC 140 marble cutter | 115 mm disc, 35 mm deep | ₹4,182 |
| Cut | GDC 141 marble cutter | 125 mm disc, 40 mm deep | ₹4,702 |
| Grind concrete | GBR 15CAG | 1,500 W, 125 mm, 2.6 kg | ₹57,124 |
Prices checked 28 Oct 2026, incl. 18% GST. Specs from Bosch's data on our product pages. Discs, blades, bits and paddles are not included or sold by us.
| GDC 14006013A40F1 | ₹4,182 |
| GDC 14106013A41F0 | ₹4,702 |
| GBH 22006112A60F0 | ₹5,055 |
| GLL3X0601063CJ0 | ₹6,298 |
| GCL 15-12 XG0601066TK0 | ₹6,815 |
| GLL 50 G06010653K0 | ₹7,330 |
| GRW 14006011C40F0 | ₹7,378 |
| GSH 5HX06113388F1 | ₹16,621 |
| GBR 15CAG06017760F0 | ₹57,124 |
Prices include GST and are read from the shop as this page loads.
Step by step
Taking up old tile and floor
For wall tiles and small areas, the GBH 220 (₹5,055): Bosch builds it as a three-mode rotary hammer — hammer drilling, drilling and chiselling — at 2.3 kg. For a whole floor or a screed bed, the GSH 5HX breaker (₹16,621): 7.8 J per blow, 5.7 kg, made for demolition. Which weight fits which job is in the breaker size guide.
Mixing
The GRW 140 (₹7,378) is a 1,400 W mixer with two speeds, 480 and 750 rpm, for paddles up to 140 mm. Bosch makes it for cement, paint, plaster and other building materials, in large volumes — the job Bosch says is a struggle with a drill.
Marking the line
A line laser puts a level line across the room for the first row of tiles. The GLL3X (₹6,298) reaches 15 m at ± 0.5 mm per metre. The GCL 15-12 XG (₹6,815) projects green lines plus two red plumb points, ± 0.4 mm/m. The GLL 50 G (₹7,330) has a green horizontal and vertical line and IP55 protection. Every model is on the laser level price list.
Cutting
The marble cutter: GDC 140 (₹4,182, 115 mm disc, 35 mm deep) or GDC 141 (₹4,702, 125 mm disc, 40 mm deep), which Bosch makes for tile and stone cutting. Which one, and when a grinder does it better, is on the marble cutter page.
Grinding concrete
Before a new floor goes down on uneven concrete, the GBR 15CAG (₹57,124) grinds it: 1,500 W, 125 mm head, 2.6 kg, and Bosch built it to grind flush up to the wall, with a movable guard section for dust protection at the edge.
The two sets
- Tile fixer: ₹18,378. GDC 141 + GRW 140 + GLL3X.
- Renovation: ₹40,571. GBH 220 + GSH 5HX + GRW 140 + GDC 141 + GCL 15-12 XG. Add the GBR 15CAG and it is ₹97,695.
These are the sums of each machine's price; there is no package price.
Questions buyers ask
Tile kaatne ki machine kitne ki hai?
Bosch marble cutter GDC 140 ₹4,182 aur GDC 141 ₹4,702 ki hai, GST ke saath. GDC 141 ko Bosch tile aur pathar kaatne ke liye banata hai.
Which machine is used to cut tiles?
A marble cutter (GDC) for straight cuts; a small angle grinder for notches and curves. Both are compared on the marble cutter page.
GBH 220 or GSH 5HX for removing tiles?
A few walls of tile: the GBH 220 in chisel mode. A whole floor, or tile on a thick mortar bed: the GSH 5HX, which hits nearly four times as hard (7.8 J against 2 J).
Can the GRW 140 mix tile adhesive?
Bosch names cement, paint, plaster and other building materials. Check the mixing instructions on your adhesive bag for the speed it asks for; the GRW 140 has 480 and 750 rpm.
Do you sell a marble polishing machine?
No. We do not list a floor or marble polisher. The GPO polishers on our list are ones Bosch describes for vehicle and metal surface finishing, so we do not offer them for marble.
Do you sell diamond blades, chisels and mixing paddles?
No. We sell the machines. Buy a 115 mm blade for the GDC 140, 125 mm for the GDC 141, an SDS plus chisel for the GBH 220 and a 17 mm hex chisel for the GSH 5HX.
Are these prices with GST?
Yes, with a GST invoice. Before GST the GDC 141 is ₹3,985 and the GRW 140 is ₹6,253. See what a proper tool invoice must show.
What does delivery cost?
Delivery is charged at actual cost, on top of the price, and confirmed on the call before you pay.
Send us your list
Tell us what you fix — wall tile, floor tile, marble, granite — and how big the jobs are, and we will price the set that fits. Call 9599157340 or send us a WhatsApp. Aryan Enterprises is an authorized Bosch dealer in Badarpur, Delhi. Every machine type is on the Bosch price list by machine.